Results 1 to 4 of 4

Thread: How to install on Hyper-V server

  1. #1
    Junior Member
    Join Date
    May 2016
    Posts
    2

    Question How to install on Hyper-V server

    With Hyper-V 2012 R2 server core installed I cannot use media, like USB or optical drive. So how to install the 5nine manager?

  2. #2
    Junior Member
    Join Date
    May 2016
    Posts
    2

    Lightbulb

    Nevermind, finally got a USB flash drive to read and installed it on the Hyper-V server. Now I can actually check it out.

  3. #3
    Junior Member
    Join Date
    May 2016
    Posts
    1

    Smile Install without using USB etc

    Quote Originally Posted by delaneybill View Post
    With Hyper-V 2012 R2 server core installed I cannot use media, like USB or optical drive. So how to install the 5nine manager?
    This is how I did it:
    1. Create a VHDx file put the files inside that (note you have to mount and unmount)
    2 Add the vhdx to the machine with server
    3. From MSDOS console, Diskpart > list disk > select disk > online disk > assign letter=e
    4. exit

    cd e:\<5nine folder>install

    note the purpose of step 3 is to create access to the disk

  4. #4
    Junior Member
    Join Date
    May 2016
    Posts
    2
    You should be able to use the USB drives in hyper-v core.
    Go into powershell and type:
    diskpart
    list disk

    above command will show all the drives available on the host. If it does not show your USB drive, then you have a hardware issue.

    Let us know.

    Paul